97
5 Use the CURSOR or button to select either “COLOR” or
“GREEN“ and press ENTER.
Items to select
• COLOR .... The on-screen characters will be displayed in
color.
• GREEN..... The on-screen characters will be displayed only in
green.
NOTE: It is recommended, if the on-screen message interferes
with the display image in the “COLOR” mode, that you select
“GREEN”.
6 To end this mode, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
“OPTION” menu → “ADJUST” menu → Source screen
• If the “RETURN USER MODE?” menu appears, use the
CURSOR or button to select either “YES” or “NO” and
press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
COLOR
GREEN
MESSAGE COLOR
RETURN USER MODE?
YES NO
SETTING
To Next Page
Loading...
Need help?
General