22
Troubleshooting/Support
Problem Check These Items
Picture bounces or a waving pattern • Move electrical devices that may be causing electrical interference away from the monitor.
is present in the picture • See inside cover of this manual for FCC information.
Edges of the display image are • Use the OSM
™
Geometry Controls to straighten the edges.
not square • If possible, position the monitor to face east.
Display image is not centered, • Use the OSM Size and Position Controls to adjust the image.
too small, or too large
Color looks blotchy • Access the Degauss Control through OSM controls. Activate the Degauss Control.
(See page 10 for more information.)
78131791 7/29/98, 9:24 AM24
To Next Page
Loading...
Need help?
General