To Next PageTo Next Page
Need help?Do you have a question about the NEC MultiSync XP29, XM29 Plus and is the answer not in the manual?
General| Screen Size | 29 inches |
|---|---|
| Display Type | CRT |
| Maximum Resolution | 1280 x 1024 |
| Refresh Rate | 75 Hz |
| Aspect Ratio | 4:3 |
| Input Video Signal | Analog RGB |
| Input Connectors | BNC |
| Vertical Refresh Rate | 50-90 Hz |
Provides essential safety warnings and precautions for operating the monitor, including electrical shock and fire hazards.
Details what the warranty covers, including specific exclusions like misuse, damage, or unauthorized repair.
Provides instructions on how to contact NEC and obtain service under the warranty, including required documentation.
Explains implied warranties, liability limits for damages, and customer rights that may vary by state.
Highlights the monitor's advanced features and lists all items included in the product package.
Identifies front panel controls, buttons, and status indicators for monitor operation.
Details the input/output ports and connectors on the rear panel of the monitor.
Describes the purpose of each button for adjusting monitor settings like power, input, and OSM.
Guides on using the remote control to access and manage On-Screen Manager (OSM) settings.
Explains the purpose and settings for DIP switch pins affecting monitor functions like sync, power, and OSM.
Details DIP switch settings for Intelligent Power Manager and external control activation.
Illustrates recommended connections for integrating the monitor with computers, VCRs, and other devices.
Details connecting an NEC IDC Series Scan Converter for enhanced video quality.
Covers powering on/off, source selection, degaussing, and navigating the OSM for adjustments.
Details the pin assignments for the D-SUB 15-pin port used for PC and external control.
Illustrates timing parameters for separate, composite, and sync-on-green video signals.
Details timing specifications for composite sync and sync-on-green video signals.
Presents detailed timing data for VGA, XGA-2, and Macintosh compatible resolutions.
Lists vertical timing parameters for various video standards and resolutions.
Maps signal types and frequencies to specific raster preset modes.
Outlines NEC's policy for providing on-site service and repair for presentation monitors.
Details the process for reporting DOA products and arranging returns for service.
