NEC NEAX 2000 IVS - Call Forwarding (All Calls, Busy, no Answer)

22
OVERRIDE A STATION CONNECTION
♦ Press an idle LOOP key.
♦ Dial desired internal station.
♦ Receive busy tone.
♦ Press
BV (Busy Verification). Warning Tone is
sent to all parties alerting them to override.
♦ Press
RELEASE or CANCEL key.
♦ Attendant only will be released.
NOTE: Busy Verification (BV) not allowed at
default. Check with your system administrator.
CALL FORWARDING
(ALL CALLS, BUSY,
NO ANSWER)
TO SET FOR A STATION
♦ Press an idle LOOP.
♦ Dial the two-digit CALL FORWARDING SET
access code (example:
*
2) and receive Special
Dial Tone.
♦ Dial the originating station number.
♦ Dial the terminating station number and receive
Service Set Tone.
♦ Press
RELEASE.