EasyManua.ls Logo

NEC NP-M311W - NEC Projector Control Overview; NEC Projector Connection Methods; Serial Connection for Projector Control; USB Connection for Projector Control

NEC NP-M311W
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5000-hour filter life
NEC is committed to designing
its products to provide long
lifecycles. This commitment
even extends to components
within its products, including
the improved lter. This
virtually maintenance-free lter
reduces the frequency at which
cleaning is required, thereby
decreasing your total cost of
ownership.
DESIGNED WITH THE ENVIRONMENT IN MIND
• Extended lamp life with ECO Mode™ technology increases lamp life up to 10,000 hours, while lowering power consumption
• Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
• Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
• Carbon savings meter calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
message at startup. A green ECO Mode button on the remote control makes the switch easy.
• Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power
off with no cooling required after shutdown) ensures efficient energy usage
• Sleep timer can be set to automatically turn off the projector at set countdown times
• Low power consumption (0.2W in stand-by mode) minimizes energy costs
Virtual Remote™
Used via a network connection (wired/wireless), you can control the projector directly from a computer without the need for
additional control cables.
Active lens cover
This cover enables presenters to immediately mute
the audio and video, then seconds later lower the
lamp brightness to 25% for a short period of time.
ADVANCED SOFTWARE FEATURES

Other manuals for NEC NP-M311W

Related product manuals