NEC NP-M311W - Page 25

025. ONSCREEN MUTE OFF
**********************************************************************
Function:
This command cancels the blanking of the on-screen display.
Command:
02H 15H 00H 00H 00H 17H
Response: At the time of a success
22H 15H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 15H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
[030. GAIN ADJUST]
**********************************************************************
*direct setting of volume
*volume increment/decrement
*direct setting of brightness
*brightness increment/decrement
*direct setting of color
*color increment/decrement
*direct setting of contrast
*contrast increment/decrement
*direct setting of sharpness
*sharpness increment/decrement
*direct setting of tint
*tint increment/decrement
brightness
contrast
color
tint<hue>
sharpness
Not supported "LT170","VT60 series","VT70 series","VT80 series”, “VT90 series"
Not supported "HT410/HT510","LT180/LT25/LT30/LT35"
volume
Not supported "LT170","VT60 series","VT70 series" (except "VT80 series, VT90 series")
Not supported "HT410/HT510","LT180/LT25/LT30/LT35"
Command:
03H 10H 00H 00H 05H DATA01 .. DATA05 CKS
DATA01 : 00H (Brightness)
01H (Contrast)
02H (Color)
03H (Tint<Hue>)
04H (Sharpness)
05H (Volume)
DATA02 : FFH (except "Volume")
00H ("Volume" only)