What to do if NEC Projector lamp approaching end of life?
When the warning message appears indicating that the lamp is nearing the end of its life, replace the lamp in your NEC Projector as soon as possible.
General| Projection distance | 1.2 - 12 m |
|---|---|
| Vertical scan range | 56 - 85 Hz |
| Horizontal scan range | 31.35 - 68.7 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 1200:1 |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | -40 - 40 ° |
| Video in | 1 x Phono Jack |
| Aspect ratio | 4:3 |
| Dimensions (WxDxH) | 272 x 199 x 80 mm |
| Power requirements | 100 - 240 VAC, 50 - 60 Hz |
| Connectivity technology | Wired |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 3500 h |
| Service life of light source (economic mode) | 4000 h |
| Focus | Manual |
| Analog signal format system | NTSC, NTSC 4.43, PAL, SECAM |
| RMS rated power | 2 W |
| Number of built-in speakers | 1 |
| Noise level | 33 dB |
| Certification | CE, TÜV GS, RoHS |
| Plug and Play | Yes |
| Power consumption (standby) | 7 W |
| Power consumption (typical) | 228 W |
Weight and Dimensions| Weight | 2300 g |
|---|
