Need help?Do you have a question about the NEC NP100 and is the answer not in the manual?
General| Projection distance | 1.2 - 12 m |
|---|---|
| Vertical scan range | 56 - 85 Hz |
| Horizontal scan range | 31.35 - 68.7 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 1200:1 |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | -40 - 40 ° |
| Video in | 1 x Phono Jack |
| Aspect ratio | 4:3 |
| Dimensions (WxDxH) | 272 x 199 x 80 mm |
| Power requirements | 100 - 240 VAC, 50 - 60 Hz |
| Connectivity technology | Wired |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 3500 h |
| Service life of light source (economic mode) | 4000 h |
| Focus | Manual |
| Analog signal format system | NTSC, NTSC 4.43, PAL, SECAM |
| RMS rated power | 2 W |
| Number of built-in speakers | 1 |
| Noise level | 33 dB |
| Certification | CE, TÜV GS, RoHS |
| Plug and Play | Yes |
| Power consumption (standby) | 7 W |
| Power consumption (typical) | 228 W |
Weight and Dimensions| Weight | 2300 g |
|---|
To Next Page
