NEC NP100 - Troubleshooting LED Indicator Status

31
... English
Appendices
Steady light =>
No light =>
Message
Power-LED
(Blue) (Red) (Purple)
Standby (Input power cable)
Flashing
(0.5 sec.)
Power on (Warming up)
Lamp lighting (Displaying)
Power off (Cooling-I)
Power off (Cooling-II)
Flashing
(0.5 sec.)
Error (Lamp failed)
Flashing
(1 sec.)
Error (Fan lock)
Flashing
(0.5 sec.)
Error (Over temp.)
Standby mode (Lamp failed)
Flashing
(1 sec.)
Standby mode (Fan lock)
Flashing
(0.5 sec.)
Standby mode (Over temp.)
Problem: LED lighting message