EasyManuals Logo

NEC NP300 Installation Guide

NEC NP300
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NEC Display Solutions Europe GmbH
NP300/NP400/NP500/NP600 Installation Guide
Ceiling Mounted and Desktop Rev 1.1
www.nec-display-solutions.com NP300/400/500/600 Page 1 of 6
Contents
Product Description, Lens Specs, Notes and Formulas Pg 1
Diagrams & Distance Charts
Pg 2
Cabinet Dimensions
Pg 3-4
Ceiling Mount Dimensions
Pg 5
Input Panel and Control Codes
Pg 6
Product Description
Type: 3 panel LCD projector, Dimensions: 308 (W) x 93,5 (H) x 262 (D)
0.63” p-Si TFT w/MLA Weight: 2,98 kg
Resolution: 1024 x 768 Brightness: NP300- 2200 Lumens
NP400 - 2600 Lumens
Fan Noise: 35 dB / 29dB @ 1 meter NP500 - 3000 Lumens
NP600 - 3500 Lumens
Power Consumption: NP300/400/NP500 295W (max) BTU’s: 1007 BTU/hour
NP600 325W (max)
Lens Specifications
Throw Ratio: 1.5 – 1.8:1 (for 100” diagonal) Focal Length: 19.8mm 23.7mm
Offset Angle: 8.0° - 9.6° (for 100” diagonal) F/#: 1.7 - 2.0
Screen Sizes: 21” - 300” diagonal (4:3) Manual Focus/Manual Zoom
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on a 4:3 aspect ratio.
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions: 4:3 Screen Formulas:
W = Image Width W = H x 4/3
H = Image Height (size) H = W x 3/4
B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.258W
C (wide) = 1.539W – 1.176
C (tele) = 1.852W – 1.173
D = 0.118W
α (wide) = tan¯¹ (B/C(wide))
α (tele) = tan¯¹ (B/C(tele))

Other manuals for NEC NP300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC NP300 and is the answer not in the manual?

NEC NP300 Specifications

General IconGeneral
Projection distance0.7/11 m
Vertical scan range50 - 120 Hz
Horizontal scan range15 - 100 kHz
Projection technologyLCD
Contrast ratio (typical)500:1
Screen size compatibility300 \
Projector native resolutionXGA (1024x768)
Lamp power210 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
Focal length range1.7 - 2 mm
Dimensions (WxDxH)308 x 262 x 93.5 mm
Power requirements200-240 V AC; 50 - 60 Hz
Connectivity technologyWired
RMS rated power7 W
S-Video inputs quantity1
CertificationCE; TÜV GS; RoHS; Gost-R
Power consumption (standby)11 W
Power consumption (typical)295 W
Weight and Dimensions IconWeight and Dimensions
Weight2980 g

Related product manuals