NEC Display Solutions Europe GmbH
NP3151W Installation Guide
Desktop and Ceiling Mount v 1.6
www.nec-display-solutions.com NP3151W Page 1 of 9
Contents
Product Description, Lens Specs, Screen/Aspect Ratio
Notes and Formulas
Pg 1
Diagrams & Distance Charts; 4:3
Pg 2
16:9___
Pg 3
Lens Shift Adjustable Range
Pg 4
Cabinet Dimensions
Pg 5
Lens Dimensions
Pg 6
Ceiling Mount Dimensions
Pg 7
Ceiling Mount Dimensions (continued)
Pg 8
Input Panel and Control Codes
Pg 9
Product Description
Type: 3 panel LCD projector, Dimensions: 399mm(W) x 150mm(H) x 358mm(D)
0.74 p-Si TFT w/MLA Weight: 7,5 kg
Resolution: 1280 x 800 (16:10) Brightness: 4000 Lumens
Fan Noise: 38 dB / 31dB @ 1 meter
Power Consumption: 490W (max) BTU’s: 1672 BTU/hour
Network Ready, integrated wired and wireless adapter Manual: Lens Shift, Horizontal & Vertical /Zoom/ Focus
Lens Specifications
NP01FL: Throw Ratio: ~ 0.8:1 Focal Length: 13.2mm NP03FL: Throw Ratio: 1.94 - 3.07:1 Focal Length: 31.6 – 50.2mm
Screen Sizes: 38”-143” F/#:2.3 Screen Sizes: 38” - 476” F/#:2.2
NP02FL: Throw Ratio: 1.18 - 1.54:1 Focal Length: 19.42 - 25.26mm NP04FL: Throw Ratio: 2.98 -4.77:1 Focal Length: 48.8 - 77.6mm
Screen Sizes: 29” - 476” F/#:2.2 _________ Screen Sizes: 57” - 476” F/#:2.2
Standard: Throw Ratio: 1.5 - 2.0:1 Focal Length: 24.4 - 32.5mm NP05FL: Throw Ratio: 4.62 - 7.02:1 Focal Length: 76.6 - 116.5mm
Screen Sizes: 29” – 476 ” F/#:1.7 Screen Sizes: 57” - 476” F/#:2.2
Screen/Aspect Ratio
16:10, 16:9 and 4:3 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
• All calculations are based on 4:3 aspect ratio.
• Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3:
Projection Formulas: Definitions:
NP01FL: C = 0.8325W – 1.33 W = Image Width
NP02ZL: C(Wide) = 1.2220W – 1.798 ----- C(Tele) = 1.5894W – 1.795 H = Image Height (size)
Standard: C(Wide) = 1.5455W – 2.022 ------ C(Tele) = 2.0555W – 2.015 C = Throw distance
NP03ZL: C(Wide) = 2.0069W – 2.830 ------ C(Tele) = 3.1710W – 2.840
NP04ZL: C(Wide) = 3.0537W – 4.830 ------ C(Tele) = 4.8860W – 4.850 4:3 Screen Formulas:
16:9 Screen Formulas:
NP05ZL: C(Wide) = 4.8275W – 7.625 ------ C(Tele) = 7.3379W – 7.645 W = H x 4/3 W = H x 16/9
H = W x 3/4 H = W x 9/16
Diagonal = W x 5/4 Screen Diagonal = W x 18.358/16
Note: Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%.
To Next Page
Need help?
General
