Need help?Do you have a question about the NEC Pinwriter P6 and is the answer not in the manual?
General| Resolution | 360 x 360 dpi |
|---|---|
| Interface | Parallel |
| Type | Impact printer |
| Paper Path | Tractor feed |
| Paper Handling | Continuous forms, cut sheets |
| Noise Level | 55 dBA |
Specifies print speeds for draft, regular, and letter quality modes.
Details noise levels in dBA for regular and quiet printing modes.
Outlines the specifications of the 24-wire impact print head.
Lists vertical line spacing options and programmability.
Highlights operator panel, digital display, and character width features.
Lists the variety of built-in font styles available for the printers.
Outlines supported character sets, including user-defined and language sets.
Specifies the size of the standard input buffer for parallel and serial interfaces.
Indicates the printer's graphic resolution capability in DPI.
Describes the printer's ability to produce multiple copies.
Lists the supported paper widths for P6 and P7 printer models.
Provides MTBF and MTTR specifications for printer durability.
Lists regulatory compliance standards (UL, CSA, VDE, FCC).
Details the functions of each switch on the SW1 board for printer configuration.
Details the functions of each switch on the SW2 board for printer configuration.
Details the functions of each switch on the SW3 board for printer configuration.
Details the functions of SW5 switches for setting the baud rate.
Details the functions of SW6 switches for communication protocol and buffer settings.
Details the functions of SW7 switches for current loop interface modes.
Lists error codes detected when the printer powers on.
Lists error codes that appear during printer operation.
Describes self-test functions accessible via the control panel for diagnostics.
Details available font types and their corresponding display codes.
Lists status codes, meanings, and corrective actions for operational issues.
Explains how to obtain and select software drivers for P6/P7 printers.
Diagram showing pin assignments for the parallel printer interface.
Diagram showing pin assignments for the RS-232 serial printer interface.
Visual representation of the major assemblies and parts for the P6 printer.
Visual representation of the major assemblies and parts for the P7 printer.
Detailed diagram showing the mechanical components of the P6 printer.
Detailed diagram showing the mechanical components of the P7 printer.
Codes for basic printer control, paper feed, and spacing.
Codes for selecting fonts, italic, condensed, and elongated printing modes.
Codes for graphics density control and setting horizontal/vertical tabs.
Codes for selecting character sets and text justification modes.
Codes for print head positioning, data repetition, and special print features.
Codes for selecting print modes, speed, color, and printer initialization.
To Next Page