Operating Instructions
11
Safety Precautions
Care and maintenance Troubleshooting Tips
Press the Start/Stop button. The unit will respond with a beep.
Open the door on the remote control. To select Soft Dry
operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is shifted
in the direction of the arrow.
Close the door on the remote control.
Set the temperature lower than the room temperature. The
temperature can be set within a range of 18°C~30°C in 1°C
increments.
During Soft Dry Operation:
❏ The indoor fan speed is automatically set to low speed and
cannot be adjusted.
Soft Dry Operation
1
2
3
To Next Page
Loading...
