1
SV9300 TELEPHONE USER GUIDE
1. Handset - Used for sending/receiving voice
2. Exit - Exit from a screen mode by pressing this key
3. Speaker - Originate a call with hands free
4. Dial Key Pad - Dial the called party number of feature access
code
5. Hold - Place a call on hold
6. Transfer - Allows the user to transfer established calls to another
user
7. Speaker Key (with light) - Control the built-in speaker for hands
free dialing or monitoring
8. Cursor - Access various features with simple operation. Use the
“Up” or “Down” key to scroll to the item
9. Menu - Access the Menu of terminal
10. Mic Key (with light) - Respond hands free. LED lights during
speakerphone operation
11. Feature Key (with light) - Activate features such as terminal
setup and to program one-touch speed calling keys.
12. Answer Key (with light) - When THE LED on this key is lit, press
this key to answer the incoming call
13. Recall Key - Finish a call and hear the dial tone to make another
call
14. Programmable Keys - These keys can be programmed as flexible
line key/programmable (with light) feature key by system
administrator.
15. Soft Keys - The feature name is shown at the bottom of the LCD.
The appropriate feature key is displayed on the screen according
to the call handling process.
16. Help - Call up explanations of the soft keys on the LCD
17. USB Port (Back) - Connect USC device for charging, etc.
18. LCD - Display date or dialed number, etc.
19. Call Indicator Lamp - When using VOICEMAIL, the lamp lights
when a message has been left
KEYS & LAMPS
To Next Page
Need help?
General