INTRODUCTION
– 1 – NWA-011436-001 Rev.3.0
9ych0001.fm
INTRODUCTION
PURPOSE
This manual explains the hardware installation and the programming procedure for providing SIP trunk
system to the NEAX 2000 IPS System.
OUTLINE OF THIS MANUAL
This manual consists of four chapters. The following paragraphs summarize Chapters 1 through 4.
CHAPTER 1 GENERAL INFORMATION
This chapter explains the SIP trunk system outline, service conditions, and the
service features.
CHAPTER 2 INSTALLATION
This chapter explains the required equipment and the hardware installation
procedure to the SIP trunk system.
CHAPTER 3 SYSTEM DATA PROGRAMMING
This chapter explains the programming procedure for providing SIP trunk system.
CHAPTER 4 CIRCUIT CARD INFORMATION
This chapter explains the mounting location, meaning of lamp indications, and the
switch settings of the SIP circuit card.
PURPOSE/OUTLINE OF THIS MANUAL
To Next Page
Loading...
