UNIVERGE SL2100 Release 1.8 Overview
Copyright 2018 NEC Enterprise Solutions Exclusively for use by NEC Enterprise Solutions channel partners
All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. 15 of 34
Advanced Items > VoIP > Extensions > SIP Extensions > SIP Extension TLS Settings > SIP Extension TLS
Basic Setup
This is a read only value that shows the protocol of the connected SIP Terminal. This can be UDP
(Default state), TCP or TLS. This shows the value negotiated by the Terminal when registering with the
SL2100.
To Next Page
Loading...
