UNIVERGE SL2100 Release 1.8 Overview
Copyright 2018 NEC Enterprise Solutions Exclusively for use by NEC Enterprise Solutions channel partners
All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner. 17 of 34
For further details on SRTP see later in this section.
90-10 System Alarm Setup
Item 74 is for TLS alarming.
Select the alarm level – Not Set, Major, Minor.
Check the box for Report if you wish the TLS errors to be reported (see Maintenance later in this
section for details of alarms)
15-05-51 Transport Protocol
This is a read only value that shows the Protocol of the connected SIP Terminal. This can be UDP
(Default state), TCP or TLS. This shows the value negotiated by the Terminal with the SL2100.
To Next Page
Loading...
