EasyManua.ls Logo

NEC V404 - Browser Control

NEC V404
10 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEC Display Solutions of America, Inc.
V404/P404 Installation Guide
40” LCD Display
Rev 1.0
www.necdisplay.com V404/P404 Page 10 of 10
Input Panel (Bottom)
Input Panel (Side - Rotated)
Browser Control
Information and control can also be available through the HTTP browser control menu.
In order to accomplish this, type: http://<the Monitor’s IP address>/pd_index.html
Note that the LAN Power needs to be turned on in order for the display to be controlled while the units are off.
All displays are set to the IP address 192.168.0.10 as default. Note that Media Player has separate IP Address menu that can be
accessed from the Monitor’s menu or directly using separate IP Address. IP Address for Media Player is set to 192.168.0.110 for
default configuration
Communicating network PC needs to be on the same subnet as display that is being communicated with

Related product manuals