NEC VERSA 4000 - Status Bar; Status Bar Location; Control and Switch Functions

2-4 Setup and Operation
Table Section 2-2 Control and Switch Functions
Control Function
Microphone Allows the user to record monophonic sound directly into the NEC
Versa 4000 system.
Suspend/Resume
Button
Press the button for Suspend mode, press again to resume active
mode.
Power Switch Turns the system on when pushed to the right. Turns the system off
when pushed to the right again..
LCD Sensor Senses when the LCD panel is closed, and turns off the panel.
Kensington Lock Enables the user to add an optional Kensington Lock.
Volume Control Controls the speaker volume.
Contrast Control Adjust the dark/light background on the LCD using this switch (on
DSTN models only).
Brightness Control Move the control upward to increase brightness on the LCD. Lower the
control to decrease brightness on the LCD. A brighter adjustment uses
more battery power. For longer battery life, decrease the brightness.
Status Bar
The NEC Versa 4000 status bar is located in the upper left corner of the keyboard panel.
Figure Figure Section 2-4 shows the status bar.
Figure Section 2-4 Status Bar Location
Status
Bar