NEC VERSA 4000 - Function Keys (Fn Keys); Smart Power Switch; Fnkey Operations

2-6 Setup and Operation
Function Keys (Fn Keys)
Function keys set specific system parameters and are built into the ROM. When using these
keys, simultaneously press
Fn
and the corresponding function key. See Table Section 2-3
for a list of ROM-based hot keys. ROM-based hot keys change system parameters tempo-
rarily. Hot Key functions operate until the system is turned off or reset.
Table Section 2-3 FnKey Operations
Key Function
Fn F2 Highlight, toggles the contrast between standard and full.
Fn F3 LCD/CRT, toggles between LCD and CRT modes.
Fn F5 Backlight, toggles the backlight between standard and full
Fn F6 Speaker Volume, turns speaker volume on/off.
Fn F7 Power Management (P/M), sets P/M levels to highest
performance, longest battery life, custom values, or off.
Fn F12 Scroll/Lock On/Off
Smart Power Switch
Provides an automatic feature that prevents you from accidentally powering off the NEC
Versa 4000, and losing your data while your system is in Suspend mode. The smart power
switch senses that the system is in Suspend mode and prevents you from directly powering
off the system when you press the power switch.
To power off the system from Suspend mode,
1.
Press the Suspend/Resume button to make the system active.
2.
Press the power button to turn off the system.