3-14 Disassembly and Reassembly
PC Card Assembly
1. On the underside of the Main board remove four screws (A).
2. Turn the Main board over and disconnect the PC card assembly from the
Main board.
PC Card Assembly
A – Screws
Microphone
1. Turn the Main board over; disconnect the microphone cable at P4.
2. Remove the microphone by sliding away from the Main board.
This completes the disassembly process.
Reassembly
Reassembly is the reverse of the disassembly process use care to insure that are
cables and screws at returned to their proper positions.
To Next Page
Loading...
