- 6 -
BEFORE SEWING
1. Fit plug into the machine.
2. Insert plug into the main socket.
3. Sewing speed can be varied by the foot
control.
CAUTION: When the machine is not being used, when cleaning it or changing its
lamp, disconnect it from the electric outlet.
Bulb replacement:
1. Open face cover in direction of arrow.
2. Remove bulb by unscrewing it
counter-clockwise.
3. Install a new bulb by screwing it in
clockwise.
4. Use a 15 watt bulb. (max)
Power supply / Power supply plug
Speed Controller
Power supply
Plug receptacle
machine plug
Sew lamp
To Next Page
Loading...
