21
Straight stitch
Using
the all purpose foot.
v
Adjusting the stitch length
Turn the stitch length dial, and the length of
the individual stitches will decrease as the dial
approaches "0". The length of the individual
stitches will increase as the dial approaches
"4".
Generally speaking, the thicker the fabric,
thread and needle, the longer the stitch
should be.
If the machine has no stitch width dial
function, use the pattern selector dial to adjust
the needle position.
v
Changing the needle position
The needle position for straight stitches can
be changed by adjusting the stitch width dial.
The "0" is the center and "5" is full right
needle position.
If the machine has no stitch length dial
function, use the pattern selector dial to adjust
the stitch length.
To Next Page
Loading...
