Nedap PowerRouter PR30S Application Guideline

16
DC disconnection switch
Since the voltage across the photovoltaic connections can be very high, it is important that the PowerRouter
can be disconnected from the photovoltaic modules for assembly or maintenance or in an emergency. A DC
switch is located on the back side of the PowerRouter. On PowerRouters with two photovoltaic inputs, this
switch disconnects both at the same time.
Figure 20: DC disconnection switch on the PowerRouter

Nedap PowerRouter PR30S Specifications

General

Brand	Nedap
Model	PowerRouter PR30S
Category	Inverter
Language	English