Need help?Do you have a question about the Nedap PowerRouter Solar PR30S and is the answer not in the manual?
Built-in anti-islanding functionality for grid-tied systems.
Requirement for serial fusing based on PV module type and configuration.
Confirmation that the PowerRouter complies with CE directives.
Guidelines for selecting an optimal and safe mounting location for the PowerRouter.
Specifications for unit dimensions and required clearances for airflow and installation.
Step-by-step instructions for physically mounting the PowerRouter unit.
Detailed instructions for connecting the PowerRouter to AC grid and local output.
Procedure for connecting the solar panels (PV array) to the PowerRouter.
Explanation of the bypass switch function for maintenance and load supply.
Steps and information for connecting the PowerRouter to the internet for monitoring.
Information on the optional CAN-bus connector for future use.
Description of the two programmable potential-free contacts for alarms and future use.
Recommended procedure using the built-in install wizard for system parameter setup.
Procedure using PC software for advanced system parameter configuration.
How to navigate the PowerRouter interface using the four control buttons.
Accessing service functions like Reset, Self test, and Error history.
Procedure for restarting the PowerRouter to resolve operational issues.
Performing a safety check by simulating grid voltage and frequency abnormalities.
Viewing the last 10 error messages for troubleshooting purposes.
Configurable parameters for the AC alarm relay during the install wizard.
Understanding PowerRouter status through LED colors and states (ON, OFF, FLASHING).
Steps to resolve operational difficulties and information to provide to support.
Details on the 5-year factory warranty and extended warranty options.
Specific conditions and services covered under the PowerRouter warranty.
Conditions under which warranty claims and liability are excluded.
List of error codes originating from the solar module and their recommended actions.
List of error codes related to grid connection and their recommended actions.
List of general system errors and their recommended actions.
Technical specifications related to the AC grid connection and output.
Technical specifications for the DC solar input and connections.
Operating conditions, temperature range, humidity, and certifications.
General physical specifications including dimensions, weight, and topology.
Procedure for safely disconnecting PV connectors using the PV-MS tool.
To Next Page
General
