Nedap V-Scan - User Interface Overview

VP5002-300PM-00GB-V-Scan Manual version 2.7 / Page 3
3. Description
3.1. Interface
 Display
The header displays:
- name of current screen
- battery charge level
- Bluetooth communication on/off
The footer displays:
- status of “OK” key
- status of the “Back” key
The text area displays the menu or record data.
 Numeric
keyboard:
Editing of a numeric value (0..9)
 Up/Down key:
With these keys the selection within a menu can be
altered and during data entry the minus sign and
decimal symbol can be entered.
minus sign:  key long, decimal symbol:  key
short.
 Scan key:
Switch on the V-Scan (long-press) and start
scanning. “Double press” enables the Multi Scan
mode. (Scan time must be set >0 s)
 Back key:
Back/Decline. The left navigation icon indicates
whether the back key is enabled or not. When the
Back key is long-pressed, the V-Scan will switch off.
 OK key:
Select/Accept. The footer shows what the current
action is of the OK-key. The right navigation icon
indicates whether the OK-key is enabled or not.
In some menus, the OK-key can be long-pressed
to activate a sub-option-menu. This is indicated with
an up-arrow symbol ↑ after the “OK”.
Action in footer is activated by pressing OK button
Option menu available by pressing OK button long
Header
Text area ( 4 lines)
Footer