Nedap WIM - Installation Procedures; Safety Precautions; Device Dimensions

WIM | QUICK REFERENCE GUIDE
4/4
Rear side
Power input Use the supplied 24VDC power adapter. Power supplies must be able to supply 12 – 24
VDC / 5 Watt (positive voltage at center pin).
Switches
Plate conversion mode switches.
DIMENSIONS
Plate conversion mode switches
1
2
3
4
Wiegand 26-bit SHA-1
ON
ON
ON
ON
Wiegand 64-bit
OFF
ON
ON
ON
Magstripe ISO7811 track 1
ON
OFF
OFF
ON
Magstripe ISO7811 track 2
OFF
OFF
OFF
ON
Barcode wand emulation code39
ON
OFF
OFF
OFF
Wiegand match-list mode (EEPROM 1008 plates)
OFF
OFF
OFF
OFF
Wiegand match-list XL mode (FLASH 20480 plates)
OFF
OFF
ON
OFF
125 mm [ 4.9 " ]
35 mm [ 1.4 " ]
130 mm [ 5.1 " ]
Switches
Power input