Nederman 865 - Maintenance; Service instruction; Spare Parts; Ordering spare parts

Exhaust Hose Reel 865
• Check that the reel is secured to the ceiling or on the
wall.
• Check the duct connections for leakage.
• Check the hose for damage.
• Check the coiling function of the hose. Adjust the
spring power when necessary. See Section4.7Ad-
justment of spring tension.
• Check the hose connection in the connection piece
inside the drum.
• Check the operation of the damper. The damper
should open automatically when the hose is pulled
out.
• Check that there is enough suction capacity in
the extraction unit before it is connected to the
vehicle’s exhaust pipe. If not, check the fan impeller
rotation direction and/or damper function. If neces-
sary check the installation of the fan start switch.
6Spare Parts
CAUTION!Risk of equipment damage
Use only N$e$d$e$r$m$a$n$ original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
N$e$d$e$r$m$a$n$ for advice on technical service or
if you require help with spare parts. See also
w$w$w$.$n$e$d$e$r$m$a$n$.$c$o$m$.
6.1Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
w$w$w$.$n$e$d$e$r$m$a$n$.$c$o$m$/$e$n$/$s$e$r$v$i$c$e$/$s$p$a$r$e$-$p$a$r$t$-
$s$e$a$r$c$h$).
• Quantity of the parts required.
7Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or$N$e$d$e$r$m$a$n$ if uncertainties arise
when scrapping the product at the end of its service
life.
EN
17