N16/24/27/29/40
1
2
Preface
Thank you for choosing Nederman. We are a world class supplier and developer of
products and solutions for the environmental technology sector.
Review all product documentation and the identification plate carefully prior to
installation, use and maintenance of this product. Replace documentation immediately
if lost.
All installation, repair and maintenance must be conducted by qualified personnel
using only Nederman original spare parts. Contact your nearest authorized dealer or
Nederman for advice on technical service or spare parts are needed.
Please contact your carrier and local Nederman representative immediately if there
are missing or damaged parts when delivered.
Nederman reserves the right, without notice, to improve our products and
documentation.
Safety
This document contains hazard information that is presented as a warning, caution or
note as follows:
WARNING! Risk of Personal Injury
Warnings indicate a potential hazard to the health and safety to personnel and
how to avoid that hazard.
CAUTION! Risk of Equipment Damage
Cautions indicate a potential hazard to the product but not to personnel and how to
avoid it.
NOTE! Notes contain information which the user should be aware.
3
3.1
Nederman Customer Service & Technical Support techsupport.us@nederman.com +1 (336) 821-0800
10
3.2
Description
N-Series are centrifugal fans mainly designed for use with Nederman extraction
products and ideal for welding fumes, steam dust or providing fresh air in confined and
enclosed spaces. These compact fans are easy to use indoors and outdoors
Dimensions
See Figures 1-3 Page 4
Pressure Drop/Fan Curves
See Figures 9-12 Pages 6-9
A
Total pressure
B Static pressure
C
Total pressure (1,1 kW, 1.5 hp)
D Static pressure (1,1 kW, 1.5 hp)
E Total pressure (1,5 kW, 2.0 hp)
F Static pressure (1,5 kW, 2.0 hp)
G Total pressure (2,2 kW, 3.0 hp)
H Static pressure (2,2 kW, 3.0 hp)
To Next Page
Loading...
Need help?
General
