5. Handle the new filter cartridge carefully to avoid damage by sharp objects. Insert
the new filter cartridge. Remount the knob tightly to ensure good cleaning.
Tighten the knob properly.
CAUTION!
Do not run over the power cable.
Do not inhale while cleaning the filter on the filthy side or while the door to the
filthy side is opened.
Do not put fingers or any other body parts in the moving parts of the machine.
Do not use a damaged dust receptacle.
Do not aim the hood at other persons.
Do not put burning objects such as cigarettes into the arm.
Be careful when moving the WeldFilter EC10/EC20, since it is very heavy.
11.4 Spare parts
Installation, repair and maintenance work must be carried out by qualified personnel
using only original Nederman spare parts. Contact your nearest authorized distributor or
AB Ph. Nederman & Co. for advice on technical service or if you require spare parts. See
also www.nederman.com.
Ordering spare parts
See www.nederman.com.
When ordering spare parts always state the following:
Part- and control number (see the product identification plate).
Detail number and name of the spare part (see www.nederman.com).
Quantity of the parts required.
To Next Page
Loading...
Need help?
General
