nedis VSPL3468AT - Quick Start Guide

4
a
Quick start guide
HDMI Splitter VSPL3468AT
For more information see the extended manual online:
ned.is/vspl3468at
Intended use
The VSPL3468AT is a splitter that splits 1 HDMI input to 8 HDMI outputs.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty
and proper functioning.
Main parts (image A)

HDMI output

HDMI input

Power supply port

Power switch

Reset button

Output indicator LED

Power indicator LED

Power cable
Safety instructions
-
WARNING
• Only use the product as described in this manual.
• Do not use a damaged product.
• Do not expose the product to direct sunlight, naked flames or heat.
• Do not expose the product to water or moisture.
• Place the product on a stable and flat surface.
• Do not drop the product and avoid bumping.
• Do not open the product.
• Keep the product out of reach from children.
Connecting the splitter
-
Make sure all the devices you want to connect have been switched off.
1. Plug an HDMI cable (not included) from your source device into A
2
.
2. Plug up to 8 HDMI cables (not included) from your displays into A
3
.