EasyManua.ls Logo

nedis WIFIDS10WT - Maintenance and Technical Specifications; Hush Function Operation; Cleaning and Maintenance Guide; Technical Data and Certifications

nedis WIFIDS10WT
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
English
Hush function
If the alarm sounds falsely due to cooking, the alarm can
be paused for 10 minutes by pressing the test button.
The LED indicator will ash every 8 seconds. Locate the
source of the alarm before using the hush function in
order to make sure that it is not a life-threatening
situation.
Cleaning and maintenance
Warning!
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
Replace the battery immediately when the device
gives a low-battery warning. Only use the batteries
specied in the manual.
Clean the outside of the device at least once a month.
Use a vacuum cleaner with brush nozzle to clean the
outside of the device.
Technical data
Battery
Battery type 2x AA, alkaline
Rated voltage 1.5 V DC
Recommended batteries
Energize: E91
Gold Peak Group: GP15A LR6
Raymax: LR6
Wi-Fi
Wireless frequency 2.4 GHz
Wireless transmission current < 450 mA
Wireless distance > 30 m
Total maximum transmission
power
17 dBm
Frequency range 2.412 – 2.484 MHz
16
0359
0359-CPR-00622
EN 14604:2005/AC:2008
GS558D
Intended re safety and
installed in buildings
Essential characteristic 1: Pass
Essential characteristic 2: Pass
Essential characteristic 3: Pass
Essential characteristic 4: Pass
Essential characteristic 5: Pass
Essential characteristic 6: Pass
Essential characteristic 7: Pass
Essential characteristic 8: Pass
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
Contact
NEDIS BV, De Tweeling 28, 5215 MC ‘s-Hertogenbosch,
the Netherlands

Related product manuals