Doc. no: 312-0003-002-001 Rev 1.06 Page 4 of 19
Description:
The Neets Audio Amplifier version 1-3 are all intended for single room applications, they may be used for other
things but the idea behind them is single room applications (ex. Class- or meeting-room).
All 3 versions are high performing class “D” amplifiers, and they can all be controlled over RS-232. Bellow you
will find the specifications for the 3 models.
Description
Part number#:
Output power in 8 ohm RMS
Short circuit safe speaker outputs
Unbalanced line input (0.316 VRMS, -10dBV)
Balanced line input (0.316 VRMS, -10dBV)
Preamplifier out (Level control depending on volume settings)
Microphone input (Phantom power possible 24VDC)
Direct connection for Mute button (Active pulse < 0.2 VDC)
Direct connection for volume up/down (Active pulse < 0.2 VDC)
Direct connection for input selection (Active pulse < 0.2 VDC)
LAN Loopthrough (LAN to RS-232)
Homepage control (Thru web browser)
To Next Page
Loading...
Need help?
General
