en Home Connect
22
oHome Connect
Ho me Connect
This appliance is Wi-Fi-capable and can be remotely
controlled using a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven
with no network connection and can still be operated
via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
■ Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 5
■ Operating the appliance directly from the appliance
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.
Setting up
To set up Home Connect for your appliance, you
require the following:
■ Your appliance that is connected to the power
supply and switched on,
■ A smartphone or tablet with a current version of the
iOS or Android operating system,
■ And your appliance within range of your home
network's Wi-Fi signal.
1. Download the Home Connect app (household).
2. Open the Home Connect app (household) and scan
the QR code.
3. Follow the instructions in the Home Connect
(household) app.
Remote Start
To start and operate your appliance via the Home
Connect app, you must activate remote start. If remote
start is not activated, you can only view the operating
statuses in the Home Connect app and configure your
appliance's settings.
Note: If you open the appliance door 15 minutes after
remote start activation or the end of operation, the
remote start is automatically deactivated.
:Warning – Fire hazard!
Combustible objects that are left in the cooking
compartment may catch fire. Never store combustible
objects in the cooking compartment.
Activating remote start
Turn the function selector to C.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
Note: You will find the Home Connect settings in your
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Setting Selection/display
•’‹‚ Network connec-
tion
‹ = Not connected*
‚ = Connect automatically
ƒ = Connect manually
„ = Connected*
•’‹ƒ Pairing
(connecting to the
app)
‹ = Ready
‚ = Connect appliance
ƒ = Appliance is connected*
•’‹„ Wi-Fi ‹ = Switch off
‚ = Switch on
If Wi-Fi has been activated, you can
use the Home Connect functions. In
networked standby mode, the appli-
ance requires a maximum of 2 W.
•’‹… Remote control
behaviour
‹ = Monitoring
You can display the operating statuses
of your appliance in the Home Con-
nect app.
‚ = Manual remote start**
You can operate and start your appli-
ance remotely. However, you must
activate the remote start before each
operation.
ƒ = Continuous remote start
You can always operate and start your
appliance always remotely without
having to activate remote start.
•’‹† Software update ‹ = No update available*
‚ = Update available*
ƒ = Start an available update
•’‹‡ Allow remote diag-
nostics
‹ = No**
‚ = Yes
* Display value (not adjustable)
** Factory setting
To Next Page
Loading...
Need help?
General
