NEFF C17MS22N0 User Manual

en Before using for the first time
12
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings that you will need to configure before you can
use it will appear.
Note:You can change these settings at any time by
going to the basic settings.
→"Basic settings", Page19
Setting the language
1.
Connect the appliance to the power supply.
a The first setting will appear after a few seconds.
2.
Use the ⁠button to navigate to the bottom row.
3.
Use the ⁠ or ⁠button to select the language.
4.
Use the ⁠button to navigate back to the top row.
5.
Use the ⁠button to select the next setting.
Setting the time
1.
Use the ⁠button to navigate to the bottom row.
2.
Use the ⁠ or ⁠button to select the correct hour.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the correct number of
minutes.
5.
Use the ⁠button to navigate back to the top row.
6.
Use the ⁠button to select the next setting.
Setting the date
1.
Use the ⁠button to navigate to the next row.
2.
Use the ⁠ or ⁠button to select the correct day.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the correct month.
5.
Use the ⁠button to navigate to the next row.
6.
Use the ⁠ or ⁠button to select the correct year.
7.
Press the ⁠button repeatedly until "Date" appears.
8.
Use the ⁠button to apply the settings.
7 Basic operation
7.1 Switching on the appliance
▶
Press ⁠ to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→"Basic settings", Page19
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press ⁠ to switch the appliance off.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→"Residual heat indicator", Page12
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→"Cooling fan", Page10
7.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Temperature
Residual heat high Over 120°C
Residual heat low Between 60 and 120°C
7.4 Setting the type of heating and
temperature
1.
Press ⁠ to switch the appliance on.
a The heating functions will then be displayed.
2.
Use the ⁠ or ⁠button to select the required heating
function.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the required temperat-
ure or setting.
5.
Press ⁠ to start.
a The cooking time will appear on the display.
a The heat-up indicator bar visualises the rising tem-
perature.
6.
When the food is ready, press ⁠ to switch the appli-
ance off.
7.5 Changing the temperature
You can also change the temperature once you have
started the appliance.
1.
Use the ⁠ or ⁠button to select the temperature
row.
2.
Use the ⁠ or ⁠button to select the required temperat-
ure.
a The temperature will now be changed.
7.6 Changing the type of heating
If you switch to a different heating function, the appli-
ance will reset all the settings.
1.
Press ⁠ to pause operation.
2.
Use the ⁠ or ⁠button to select the required heating
function.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the required temperat-
ure.
5.
Press ⁠ to start.
7.7 Pausing operation
1.
Press ⁠.
2.
Press ⁠ again to resume operation.

NEFF C17MS22N0 Specifications

General

Brand	NEFF
Model	C17MS22N0
Category	Oven
Language	English