NEFF C27CS22H0B User Manual

en Basic operation
12
3.
Press ⁠ to switch the appliance on.
→"Switching on the appliance", Page12
4.
Set the required heating function and temperature
for the heat-up process and press ⁠ to start.
→"Setting the type of heating and temperature",
Page12
Heating up
Heating function CircoTherm hot air ⁠
Temperature Maximum
Cooking time 1hour
5.
Keep the kitchen ventilated while the appliance is
heating.
6.
Press ⁠ to switch off the appliance after 1hour.
→"Switching off the appliance", Page12
7.
Allow the appliance to cool down.
8.
Clean the smooth surfaces with soapy water and a
dish cloth.
9.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
7 Basic operation
7.1 Switching on the appliance
▶
Press ⁠ to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→"Basic settings", Page16
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press ⁠ to switch the appliance off.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→"Residual heat indicator", Page12
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→"Cooling fan", Page10
7.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Temperature
Residual heat high Over 120°C
Residual heat low Between 60 and 120°C
7.4 Setting the type of heating and
temperature
1.
Press ⁠ to switch the appliance on.
a The heating functions will then be displayed.
2.
Use the ⁠ or ⁠button to select the required heating
function.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the required temperat-
ure or setting.
5.
Press ⁠ to start.
a The cooking time will appear on the display.
a The heat-up indicator bar visualises the rising tem-
perature.
6.
When the food is ready, press ⁠ to switch the appli-
ance off.
7.5 Changing the temperature
You can also change the temperature once you have
started the appliance.
1.
Use the ⁠ or ⁠button to select the temperature
row.
2.
Use the ⁠ or ⁠button to select the required temperat-
ure.
a The temperature will now be changed.
7.6 Changing the type of heating
If you switch to a different heating function, the appli-
ance will reset all the settings.
1.
Press ⁠ to pause operation.
2.
Use the ⁠ or ⁠button to select the required heating
function.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the required temperat-
ure.
5.
Press ⁠ to start.
7.7 Pausing operation
1.
Press ⁠.
2.
Press ⁠ again to resume operation.
7.8 Cancelling operation
Note:Some functions, e.g. cleaning functions, cannot
be cancelled.
▶
Press and hold the ⁠button until the function that is
currently in progress is cancelled.
a Operation will stop and all the settings will be reset.
a The cooling fan will continue to run until the cooking
compartment has cooled down.
7.9 Viewing the current temperature
You can view the current temperature while the appli-
ance is heating up.
▶
Press ⁠.
a The temperature will be displayed for a few
seconds.
7.10 Displaying information
Requirement:The ⁠button must be lit.

NEFF C27CS22H0B Specifications

General

Brand	NEFF
Model	C27CS22H0B
Category	Oven
Language	English