en Installation instructions
16
15.1 Statement of Compliance for Great
Britain
The full Statement of Compliance according to the
Product Security and Telecommunications Infrastruc-
ture (Security Requirements for Relevant Connectable
Products) Regulations 2023 can be found online at
www.neff-home.com/uk/ among the additional docu-
ments on the product page for your appliance.
Product type
This statement of compliance covers the products de-
scribed in this information for use whose model identi-
fier group is seen on the title page. The full model iden-
tifier is made up of the characters before the slash in
the product number (E no.) which can be found on the
rating plate. Alternatively, you can also find the model
identifier in the first line of the UK Energy Label.
Name and address of manufacturer
BSH Hausgeräte GmbH, Carl-Wery-Strasse 34, 81739
München, Germany
This statement of compliance is prepared by the manu-
facturer.
The manufacturer, BSH Hausgeräte GmbH deems that
it has complied with
¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and,
where relevant, provision 5.1-2 of ETSI EN 303 645
v2.1.1;
¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1;
¡ provision 5.3-13 of ETSI EN 303 645 v2.1.1.
Support period
BSH Hausgeräte GmbH will provide security updates
that are necessary to maintain the main functions free
of charge until at least 28/02/2034.
Installation instructions
16 Installation instructions
16.1 Included with the appliance
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
16.2 Dimensions
You will find the dimensions of the appliance here
16.3 Safety clearances
Comply with the safety clearances for the appliance.
To Next Page
Loading...
Need help?
General
