NEFF S199YB801E User Manual

Basic settings en
37
16 Basic settings
You can configure the basic settings for your appliance to meet your needs.
16.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Selection Description
Time setting 00:00 - 24:00 Set the current time.
The setting depends on the time
format selected.
Time format 12 h
24 h
1
Set the time format.
Time display In hours
Time
1
Set the time display for the end of the
programme.
"Finish in" shows the remaining time
the programme has to run, e.g.
3h25min.
"Finish at" shows the time when the
programme will end, e.g. 15:20hours.
Sprache/Lan-
guage
See selection on
the appliance.
Select the menu language.
Water hardness 0 - 62
16 - 20 medium
1
Set the water hardness.
→"Overview of water hardness set-
tings", Page26
Rinse aid dis-
penser
0 - 6
5
1
Set or switch off the amount of rinse
aid to be dispensed.
→"Setting the amount of rinse aid",
Page29
Sensor setting Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying
soiling.
→"Sensors", Page12
Extra Dry on
off
1
Switch "Extra Dry" on or off for each
operation.
The temperature is increased during
the final rinse for a better drying res-
ult. This may increase the running
time slightly.
Please take care with delicate table-
ware.
1
Factory setting (may vary according to model)

NEFF S199YB801E Specifications

General

Brand	NEFF
Model	S199YB801E
Category	Dishwasher
Language	English