Getting to know your appliance en
13
Settings
The dishwasher has been preset with
certain settings for your convenience.
You can change this factory setting.
Change the setting as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button { 8 for 3
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > )* until the
required setting is displayed.
5. Make the setting with setting buttons
+ - X.
6. Press and hold the Info button {
8 for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
Note: When you reset your dishwasher
to the factory settings, you are taken
directly to the settings for switching on
the appliance for the first time.
Setting Factory setting Infotext
by pressing Info button {
Time setting 12:00 Set the current time.
Time format 24h 12h or 24h.
Time display Time Show end of programme with display
"Finish in" or "Finish at".
Language Deutsch Language selection.
Water hardness °E 16 - 20 medium Setting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid disp. Setting 5 Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Sensor setting Standard Adjustment of soiling detection for
optimum cleaning result.
Extra dry Off Improved drying for glasses and
plasticware.
Water connection * Cold water Connection to hot water (40-60°C) or cold
water (<40°C) possible.
Eco forecast Off Show the water and energy consumption.
Auto Power Off after 1 min. Appliance automatically switches off at
end of rinsing process.
Emotion Light * On Interior light.
Front display * On The front display can be selected.
* depending on the features of your dishwasher
To Next Page
Loading...
Need help?
General
