en Positioning and connecting
16
1. Unscrew all screws usingthe
spanner supplied.
– Remove all transport safety bolts
completely
– take the mains cable out of the
retainers
2. Insert the protectivecovers..
Notes
■ Before using the appliance for the
first time, make sure that all transport
safety bolts have been removed and
kept safe for any subsequent
transport.
■ If you need to transport the
appliance at alater date, always refit
the transport safetybolts to prevent
damage to the washerdryer.
Installation surface
Note: The appliance must be stable
aligned so that it does not move
around.
■ The installation surface must be firm
and level.
■ Soft floors/floor coverings are not
suitable.
To Next Page
Loading...
