The Nekteck Shiatsu Foot Massager with Heat, Model No.: EMK-739, is designed to provide a spa-quality foot massage experience at home. It incorporates various massage techniques and features to relieve tension and stress in the feet.
Function Description:
The primary function of this device is to deliver a comprehensive foot massage using Shiatsu, kneading, rolling, air compression, and heat therapy. It features 15 acupressure massage heads on each side, targeting key pressure points on the feet. The deep kneading and rolling actions are intended to loosen knots and improve blood flow, while the air compression function provides a soothing squeeze. The integrated heat function helps to warm the feet and further melt away tension and stress. The massager is designed for human use only and is intended for household use.
Important Technical Specifications:
- Model Number: EMK-739
- Rated Voltage: DC 12V / 2.5A
- Rated Power: 30W
- Dimensions: 14.2 x 13.4 x 7.1 inches (36 x 34 x 18 cm)
- Net Weight: Approximately 6.2 lbs (2.8 kg)
- Massage Techniques: Rolling Massage, Kneading & Shiatsu, Air Compression, Soothing Heat.
Usage Features:
The massager is operated via a control panel on the device or a wireless remote controller.
- ON/OFF Button: To turn the massager on or off. Upon activation, it starts a 15-minute massage session with a slow speed, low air compression, and heat.
- Heat Button: To turn the heating function on or off. The heating function is automatically activated when the massager starts up; pressing the button will turn off the red indicator light and disable heat.
- Massage Speed Button (M): To choose between low or fast massage speeds. The massager defaults to slow speed.
- Air Compression Button: To adjust the air compression intensity to low, medium, or high. Pressing the button once after the high mode will stop the air compression function.
Safety Precautions for Usage:
- Always consult a physician before using, especially if you have medical conditions, are pregnant, have diabetes, or are ill. Stop use immediately if uncomfortable.
- Not a toy; ensure adequate supervision around children.
- Do not operate under a blanket or pillow to prevent overheating.
- Do not use or store near water (sinks, baths, showers).
- Do not carry by the supply cord.
- Do not use outdoors.
- Do not leave unattended when plugged in.
- Do not sit or stand on the massager; it is not designed to support full body weight.
- Do not insert foreign objects into openings; avoid contact with pointed or sharp objects.
- Do not operate where aerosol products are used or oxygen is administered.
- Keep the cord away from heated surfaces.
- Be cautious when using the heat function if sensitive to heat.
- Unplug immediately if the product malfunctions or is damaged.
- Always unplug after use and before cleaning.
- Do not operate with wet hands or feet.
- It is highly recommended not to use the massager or heat function continuously for over 15 minutes.
- Wear socks while using; do not use with shoes.
- Do not attempt to stand on the foot massager; use only while seated.
Maintenance Features:
To Clean:
- Unplug the massager and allow it to cool down.
- Clean only with a soft, slightly damp sponge or cloth.
- Do not allow water or any other liquids to get into the massager.
- Do not immerse the product in any liquid.
- Do not use abrasive cleaners, brushes, or strong chemicals.
To Store:
- Place the massager in its package box or in a safe, dry, and cool place.
- Avoid sharp edges and pointed objects to prevent scratching or damaging.
- Do not wrap the power cord around the product.
- Do not hang the product with the controller cord.
- Keep out of direct sunlight and high temperatures.
Troubleshooting:
A troubleshooting chart is provided for common issues like the product not working, suddenly stopping, or being abnormally warm. For defective units or unresolved issues, contact Customer Service at support@nekteck.com. Do not attempt to repair the device yourself.
Warranty and Support:
Nekteck offers a 12-month warranty from the date of purchase. Customers are encouraged to contact support@nekteck.com for any questions or concerns, providing their Order ID for faster service.