What to do if my Nekteck NK-FM06 Massager does not work?
If your Nekteck Massager isn't working, there could be a few reasons. First, make sure you've pressed the ON/OFF button. Second, check that the adapter is properly plugged into the power outlet. Finally, ensure that the DC connector is securely connected to the DC power jack.
How to fix a Nekteck NK-FM06 Massager that stops heating?
If your Nekteck Massager stops heating, ensure that you have pressed the Heat button. When pressed, the indicator light should illuminate in red.
How to adjust the massage intensity on a Nekteck Massager?
If the massage intensity of your Nekteck Massager is too high or too low, try adjusting the position of your foot. Altering the contact angle can help you find a more moderate intensity.
Why does my Nekteck Massager suddenly stop working?
Your Nekteck Massager might stop working suddenly for a couple of reasons. It could be that the massager has automatically turned off after a 15-minute session, which is normal. If you want to continue, simply press the ON/OFF button again. Alternatively, the product may have overheated. In this case, unplug it and allow it to cool down completely before using it again.
What to do if my Nekteck Massager is abnormally warm?
If your Nekteck Massager feels abnormally warm, it's likely that the product has been overused. Unplug it and allow it to cool down completely before using it again.
Important safety instructions for general use, health conditions, and supervision.
Steps for unpacking, connecting, and preparing the foot massager for use.
Procedures for cleaning the main unit and removable foot covers.
Guidelines for storing the massager safely to prevent damage.
The Nekteck Shiatsu Foot Massager Machine with Soothing Heat, Model No.: NK-FM06, is designed to provide a comprehensive foot massage experience. It combines kneading massage, air pressure, and heat therapy to relieve foot soreness and pain. The device offers three massage modes and two intensity levels, targeting soles, heels, and toes for a comfortable and rejuvenating massage.
The foot massager operates by default with a 15-minute massage session. Users can turn the massager on/off using the dedicated button. The heating function can be activated or deactivated, and its status is indicated by a red light. The air pressure intensity can be switched between low and high levels, with corresponding green indicator lights for "L" or "H." There are three massage modes (M1, M2, M3) that can be cycled through by pressing the massage mode button. Each mode has a corresponding green indicator light.
The heating function automatically turns on when a massage mode is selected. The massager has an automatic shut-off feature after 15 minutes to prevent overheating. Switching massage modes or turning the heating function on/off does not affect the timing of the massage session.
The manual provides a troubleshooting chart for common issues such as the product not working, suddenly stopping, not heating, or having incorrect massage intensity. Solutions include checking power connections, pressing the correct buttons, allowing the product to cool, and adjusting foot position. Users are advised not to attempt repairs themselves and to contact a qualified technician if problems persist.
Nekteck offers a 12-month warranty from the date of purchase. For questions or concerns, customers can contact support@nekteck.com. They aim to reply within 24 hours and request that the Order ID be included in emails for faster solutions.
Nekteck and its subsidiaries are not liable for damage caused by product use other than its intended purpose or as instructed in the manual. Improper use involves serious risks, including injury and disability. By using Nekteck's products, users agree that Nekteck accepts no responsibility for injuries that might occur and that products should be carefully inspected before each use to ensure they are undamaged and fully functional. Users may not modify or reproduce Nekteck's products.
To Next Page
General
