Need help?Do you have a question about the Nellcor OXIMAX N-600X Series and is the answer not in the manual?
General| Type | Pulse Oximeter |
|---|---|
| Measurement Parameters | SpO2, Pulse Rate, Perfusion Index |
| Perfusion Index Range | 0.02% to 20% |
| SpO2 Range | 1% to 100% |
| Dimensions | 1.5 in (D) |
| Power Source | Battery or AC adapter |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Accuracy (SpO2) | ±2 digits (70% to 100%), unspecified below 70% |
| Relative Humidity | 15% to 95%, noncondensing |
Details the items included in the OxiMax N-600x pulse oximeter package.
Describes the controls, indicators, and user interface elements on the front of the oximeter.
Details the ports and connectors located on the rear panel of the oximeter.
Provides dimensions and weight specifications for the oximeter.
Details power requirements, input frequency, and fuse specifications.
Specifies operating, transport, and storage conditions for the oximeter.
Details measurement ranges, sensor accuracy, and power dissipation for oximetry sensors.
Explains the theoretical principles behind pulse oximetry measurement techniques.
Illustrates the data flow within the OxiMax N-600x pulse oximeter.
Describes the main components on the oximeter's system board and their functions.
Highlights essential safety precautions to be followed during oximeter setup.
Provides instructions for connecting the oximeter to an AC power source.
Details information on operating the oximeter using its internal battery power.
Steps for properly connecting the OxiMax pulse oximetry sensor to the oximeter.
Explains how to monitor battery status using the fuel gauge and indicators.
Covers the process of turning the oximeter on, including power-on self-test.
Details how to adjust alarm volume, silence duration, and manage audible alarms.
Guide to navigating and using the oximeter's menu system for configuration and operation.
Information on connecting the oximeter to PCs or printers via the data port.
Instructions for setting up communication protocols and baud rates for data transfer.
Details how to configure and use the nurse call interface functionality.
Covers application issues, patient conditions, and environmental factors impacting measurements.
Outlines essential safety checks to be performed regularly on the oximeter.
Procedures for configuring custom default settings for the oximeter.
Details tests to verify oximeter functionality after repairs or during maintenance.
Lists the standards the oximeter safety tests are performed in accordance with.
Describes tests for verifying power-on defaults and alarm range settings.
Information on accessing technical services and the oximeter's on-screen help system.
Lists common symptoms and recommended corrective actions for oximeter issues.
Explains system prompts, error messages, and their corresponding resolution steps.
Instructions and procedures for returning the oximeter for service or repair.
Guides users on how to order specific replacement parts for the oximeter.
Provides a detailed list of available spare parts with descriptions and part numbers.
Instructions for safely replacing external fuses in the oximeter.
Step-by-step guide for safely disassembling and reassembling the oximeter unit.
Procedure for safely removing and replacing the internal oximeter battery.
Instructions for replacing the power entry module of the oximeter.
Steps for removing and replacing the oximeter's internal power supply unit.
Procedure for replacing the cooling fan assembly within the oximeter.
Steps for removing and replacing the display printed circuit board.
Instructions for replacing the main printed circuit board.
Procedure for replacing the audible alarm speaker assembly.
Steps for removing and replacing the top case assembly of the oximeter.
Guidance on properly packing the oximeter for return or shipping.
To Next Page
