What to do if Nellcor Medical Equipment has no response to the power button?
If your Nellcor Medical Equipment doesn't respond when you press the power button, make sure you fully depress the power button. Also, check the batteries; they might be missing, discharged, or not correctly installed. If this is the case, install new batteries.
General| Type | Pulse Oximeter |
|---|---|
| Display Type | Color LCD |
| SpO2 Range | 0% to 100% |
| Battery Type | Sealed lead-acid |
| Battery Life | Approximately 5 hours |
| Dimensions | 21.6 cm H x 12.7 cm W x 12.1 cm D (8.5 in H x 5.0 in W x 4.8 in D) |
| Accuracy (SpO2) | 70% to 100% ±3 digits (Neonate) |
| Pulse Rate Range | 20 to 250 bpm |
| Measurement Parameters | SpO2 and Pulse Rate |
| Weight (without batteries) | Approx. 200g (7 oz) |
| Operating Temperature | 5°C to 40°C |
| Relative Humidity | 15% to 95% (non-condensing) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
Key safety alerts, cautions, and general notes for safe and effective use of the NPB-40 device.
Details the device's intended use for SpO2 and pulse rate measurement and how to use the manual.
Identifies buttons and symbols on the NPB-40 front panel and rear panel.
Explains the function of each control button, display, and audible indicator.
Lists device components and guides connecting the OXIMAX sensor to the NPB-40.
Covers battery power, low battery warnings, critical indications, and installation process.
Guides on turning on the device, sensor attachment, and backlight control.
Details how to adjust pulse beep volume, alarm volume, time/date, and alarm limits.
Explains how to record snap-shot data, print data, and set up the printer.
Describes storing and viewing patient event history via OXIMAX sensor memory.
Guides on selecting OXIMAX sensors, their features, and biocompatibility.
Lists and describes optional accessories like boots, cases, printers, and cables.
Discusses performance verification and factors affecting measurements like anemia.
Details effects of saturation, pulse rates, and sensor conditions on performance.
Lists common error codes, their meanings, and corrective actions.
Addresses EMI issues and how to obtain technical support.
Covers device service, periodic safety checks, and return procedures.
Provides instructions for surface cleaning and disinfecting the NPB-40.
Explains how to navigate the NPB-40's menu system for settings.
Explains the principles of pulse oximetry and automatic calibration.
Differentiates saturation types and details OXIMAX technology integration.
Details measurement ranges, accuracy, motion tolerance, and display update interval.
Covers battery types, sensor wavelengths, and operating/storage conditions.
Lists physical dimensions, weight, and compliance standards.
To Next Page
