To Next PageTo Next Page
Need help?Do you have a question about the Nellcor N-200 and is the answer not in the manual?
General| Brand | Nellcor |
|---|---|
| Model | N-200 |
| Category | Medical Equipment |
| Language | English |
Critical safety warnings and precautions for operating the N-200 pulse oximeter.
Step-by-step guide for initial setup and operation of the N-200 pulse oximeter.
How to check and adjust alarm limits and silence audible alarms on the N-200.
Instructions on how to adjust the volume of the audible pulse tone.
General description of the NELLCOR N-200 pulse oximeter system components and functions.
Details on the N-200's automatic self-test and immediate usability after startup.
Explains the capabilities for tailoring the N-200 system to specific clinical applications.
Explains the fundamental principles of pulse oximetry and how the N-200 works.
How ECG synchronization enhances oximetry readings in challenging conditions.
Describes the process by which the N-200 automatically calibrates for accurate SpO2 measurements.
Steps for unpacking the N-200 and verifying included accessories.
Guidance on verifying the functions of the N-200 before clinical use.
Identifies and describes the N-200's components, including displays and controls.
Criteria for choosing the appropriate NELLCOR sensor for patient monitoring.
Guidelines for cleaning and safely reusing NELLCOR sensors.
Factors affecting sensor performance and how to optimize measurements.
Core steps for operating the N-200, including connections and power-up.
How to manage audible alerts, including pulse tone volume and alarm settings.
Explanation of the three modes for accurate measurements with varying patient activity.
Using ECG signals to improve pulse oximetry readings in motion or low perfusion.
Details on serial communication and connector pin assignments for external devices.
Configuration of RS-232 output formats for various devices.
Instructions for connecting N-7000, N-7500, N-9000, and printers.
Routine service requirements, battery replacement, and cleaning instructions.
How to test and maintain the N-200's battery performance.
Checking software version, technical assistance, and return procedures.
Explains status messages and recommended operator actions for error resolution.
Troubleshooting steps for common issues like power or connection problems.
Solutions for issues with pulse search, saturation display, and sensor connectivity.
Details on saturation and pulse rate accuracy, including motion and low perfusion tolerance.
Input requirements and characteristics for ECG signals used with the N-200.
Power, voltage, temperature, humidity, and altitude specifications for the N-200.
