What to do if Nellcor Medical Equipment has no response to the power button?
If your Nellcor Medical Equipment doesn't respond when you press the power button, make sure you fully depress the power button. Also, check the batteries; they might be missing, discharged, or not correctly installed. If this is the case, install new batteries.
General| Type | Pulse Oximeter |
|---|---|
| Display Type | Color LCD |
| SpO2 Range | 0% to 100% |
| Battery Type | Sealed lead-acid |
| Battery Life | Approximately 5 hours |
| Dimensions | 21.6 cm H x 12.7 cm W x 12.1 cm D (8.5 in H x 5.0 in W x 4.8 in D) |
| Accuracy (SpO2) | 70% to 100% ±3 digits (Neonate) |
| Pulse Rate Range | 20 to 250 bpm |
| Measurement Parameters | SpO2 and Pulse Rate |
| Weight (without batteries) | Approx. 200g (7 oz) |
| Operating Temperature | 5°C to 40°C |
| Relative Humidity | 15% to 95% (non-condensing) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
To Next Page
