Need help?Do you have a question about the Nelson 700 Series and is the answer not in the manual?
General| Brand | Nelson |
|---|---|
| Model | 700 Series |
| Category | Water System |
| Language | English |
Explains the patented weight-activated valve system that controls water flow into the drinking bowl.
Details the thermostatically controlled optional heater located below the crossbeam.
Step-by-step guide to remove the cover and drinking bowl for cleaning purposes.
Guide to identify and resolve obstructions causing dripping or overflow.
Procedure to inspect and replace filter and control valve for dripping issues.
Checks electrical connections and circuit breakers for potential freeze-up causes.
Visual inspection of the waterer, focusing on the heater's operation during cold temperatures.
Investigates issues like shut-off valve location and heat well size contributing to freeze-up.
Instructions for replacing the old cover with a new one provided with heaters and thermostats.
Procedure for connecting the strain relief connector to prevent cord pull-out.
Details the specific hot, neutral, and ground wires required for power supply.
Emphasizes using a licensed electrician for safe installation and maintenance.
Advises keeping the cover and bowl latched at all times unless performing maintenance.
Mandates turning off power to waterers when servicing to prevent electrocution.
Instructions on sealing air gaps to prevent freeze-up and improve energy efficiency.
Recommends covering wires to prevent animals from chewing, avoiding fire or electrocution risks.
To Next Page