Nemaxx BT80 - User Manual

Questions and Answers

K
katie86Aug 17, 2025
How to fix a Nemaxx BT80 that does not work?
- A
  ann47Aug 17, 2025
  If your Nemaxx Dehumidifier isn't working, here are some things to check: * **Power Supply:** Make sure there isn't a power cut and that the plug isn't broken. Check if the plug is inserted properly. * **Voltage:** Ensure the power voltage isn't too low. If it is wait until the supply voltage is normal. * **Cable:** If the cable is too thin, change it. * **Temperature Protection:** If the system temperature is too high and the humidity control/temperature protection light is on, repress the ON/OFF button. * **Humidity Settings:** If the set humidity is higher than the environment humidity, the device will stop. It will auto-start when ambient humidity is greater than the set humidity. * **Water Tank:** If the water tank is full, pour out the water and put the bucket back.
A
Alicia JonesAug 19, 2025
Why is my Nemaxx BT80 running but the room is still humid?
- C
  Carolyn HarrisAug 19, 2025
  If your Nemaxx Dehumidifier runs for a long time but the room remains humid, consider these possibilities: * **Openings:** Ensure that doors and windows are closed. * **Moisture Sources:** Identify and eliminate any water vapor sources in the room. * **Room Size:** The room might be too large for the dehumidifier's capacity. Adjust the space or choose a dehumidifier with a larger capacity. * **Dehumidifier Specification:** The dehumidifier might be too small for the room. Choose a dehumidifier with a larger capacity.
N
nancy87Aug 22, 2025
What to do if my Nemaxx Dehumidifier is leaking water?
- S
  Sara VaughnAug 22, 2025
  If your Nemaxx Dehumidifier is leaking water, consider the following: * **Cold Weather Usage:** If using in cold weather, the device may be defrosting repeatedly. Stop the device regularly to ensure the ice melts completely. * **Drainage Hose:** Check if the draining hose is clogged. If so, clean it. Also, verify that the draining hose is installed correctly.
D
Danielle GriffinAug 25, 2025
Why is the dehumidifying capacity of my Nemaxx Dehumidifier limited?
- S
  Scott PenningtonAug 26, 2025
  The dehumidifying capacity of your Nemaxx Dehumidifier might be limited due to: * Reduced capacitance of the fan motor and compressor. To resolve this, change the capacitor. * Refrigerant leaking. In this case, please contact a qualified professional.
C
Carrie FuentesAug 27, 2025
What to do if the motor works but the compressor doesn't work on my Nemaxx BT80 Dehumidifier?
- T
  Thomas AvilaAug 28, 2025
  If the motor of your Nemaxx Dehumidifier is working, but the compressor isn't, here's what might be happening: * **Compressor Overload:** Try pressing the ON/OFF button. If that doesn't work, contact a qualified professional. * **Compressor Burnt:** If the compressor is burnt due to leakage or low voltage, please contact a qualified professional. * **Circuit Board Issues:** If there's something wrong with the circuit board, change it. * **Defrosting:** If the DEFROST indicator light is on, the device is defrosting. Wait until defrosting is finished.
D
Derek PearsonAug 30, 2025
How to reduce noise from my Nemaxx BT80 Dehumidifier?
- M
  mitchellmichelleAug 31, 2025
  If your Nemaxx Dehumidifier is too noisy, consider these points: * **Ground Surface:** If the ground is rugged, make adjustments to level the device. * **Positioning:** Ensure the device is in the right position.
J
James CookSep 2, 2025
Why is the dehumidifying capacity low on my Nemaxx BT80?
- C
  Christina HernandezSep 2, 2025
  The dehumidifying capacity of your Nemaxx Dehumidifier might be low because: * The humidity or temperature is too low. It is recommended to stop the device. * More than two devices are working in the same room. It is recommended to use only one device.
P
Pedro TurnerSep 5, 2025
What causes the motor to not work on my Nemaxx BT80 Dehumidifier?
- H
  Heather VargasSep 5, 2025
  If the motor on your Nemaxx Dehumidifier isn't working, it could be due to: * **Compressor Capacitance:** The compressor capacitance might be invalid. Change the capacitor. * **Motor Issues:** The motor itself might be broken. Change the motor. * **Circuit Board Problems:** There could be something wrong with the circuit board. Change the circuit board.
J
Jesus LowerySep 7, 2025
What does E1 error mean on my Nemaxx BT80 Dehumidifier?
- J
  johnsalazarSep 8, 2025
  If your Nemaxx Dehumidifier displays 'E1', it indicates a Coil Sensor-Error. Exchange the coil sensor to resolve this.
W
Wyatt OsborneSep 10, 2025
What does E2 error mean on my Nemaxx BT80 Dehumidifier?
- J
  Jamie McintyreSep 12, 2025
  If your Nemaxx Dehumidifier displays 'E2', it indicates a Moisture Sensor-Error. Exchange the moisture sensor to resolve this.