EasyManua.ls Logo

Nemaxx FL 2 - Installation Guidelines

Nemaxx FL 2
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version: 7.0
16.02.2017
4
EN
Installation
Do NOT install smoke alarms in following places:
Near appliances or areas where normal combustion regularly occurs (kitchen, near
furnaces, hot water heaters). Use specialized smoke alarm with alarm control for
unwanted alarm trigger for these areas.
In areas with high humidity, like bathrooms or areas near dishwashers or washing
machines. Install at least 10 feet away from these areas.
Near air exhausts or heating and cooling supply vents. Install at least 3 feet away
from these areas. The vents could blow the smoke away from the smoke alarm
interrupting its function.
In rooms where temperatures may fall below -10°C or rise above 40°C.
In extremely dirty, dusty or insect infesting areas. These small particles may interfere
with the smoke detectors alarm operation.
The best places to install the smoke alarm:
At rst install a unit in the bedroom and hallway. If you have several bedrooms, install an
alarm in each room.
Install an alarm in the stairway and on every oor.
Smoke, heat and burning things will spread horizontally after rising to the ceiling, so
install the alarm in the middle of the ceiling and make sure all areas are covered.
If the smoke alarm cannot be installed in the middle of the ceiling, the distance
between the closest wall and the alarm should be 10 cm.
If the length of the room or the hallway is larger than 30 feet, you must install several
smoke alarms.
Side wall
Ceiling
Never here
Best here
10 cm (4“)
minimum

Related product manuals