To Next PageTo Next PageWhat to do if my Nemaxx M1-Mini sounds false alarms?
If your Nemaxx Smoke Alarm sounds false alarms intermittently, especially when cooking or showering, you can try the following: First, press the test button to pause the alarm. If that doesn't solve the issue, clean the smoke alarm. As a final step, consider moving the device to a new location and pressing the test button again.
How to fix a Nemaxx M1-Mini that doesn't sound when tested?
If your Nemaxx Smoke Alarm isn't sounding when tested, ensure the alarm is correctly adjusted onto the bracket by turning the alarm body clockwise until it matches well. If it still doesn't work, clean the device. If problems persist, replace it with a new alarm.
Why does my Nemaxx Smoke Alarm beep every 40 seconds?
If your Nemaxx Smoke Alarm beeps every 40 seconds, it indicates that the battery is low. In this case, replace the smoke alarm device.
General| Alarm volume | 85 dB |
|---|---|
| Power source | Battery |
| Battery type | 9V battery |
| Alarm Sound Level | 85 dB |
| Sensor Type | Photoelectric |
| Operating Temperature | 0°C to 45°C |
Details technical specifications like power, current, volume, sensitivity, and sound pattern.
Explains the photoelectric technology and general usage of the smoke alarm.
Crucial safety warnings and advice for using the smoke alarm device.
Lists specific locations where the smoke alarm should not be installed.
Provides guidance on optimal placement for effective smoke detection.
Step-by-step instructions on how to test the smoke alarm's functionality.
Explains the meaning of different red LED flashing patterns.
Details how to temporarily silence an alarm and its behavior.
Guidance on periodic cleaning to ensure optimal performance.
Lists common problems and their solutions for the smoke alarm.
Instructions on what to do if a fire alarm sounds.
Official statement on the product's performance against harmonized standards.
